Demister Pad for Sugar Factory
Diameter of demister pad 2000 mm
Thickness of pad: approx 150 mm ( 6 inch )
Density of pad: 80 kg/m3
Material : SUS 304
For 2 bodies of 1st effect quintuple effect evaporator of Diameter 5500 mm and ht above calandria 8000 mm
SPECIFICATION OF Demister Pads FOR 1x40 T/Hr BOILER OF SUGAR MILLS
DESIGN PARAMETERS:
To be installed in boiler steam drum for separating the water droplets from saturated steam.
Steam flow rate: 40 ton/hr. (Normal)
Operating pressure: 44-45 Kg/cm2
Operating temperature: 265 °C
Liquid density: 788 Kg/M3
Vapour density: 22.7 Kg/M3
DEMISTER PADS SPECIFICATIONS:
Mesh type: Koch 4120 or vicote x 380 or equivalent
Material: AISI304
Density: 192 Kg/M3
Surface area: 377 M2
Voids: 97.6 %
Wire surface area: 350 FVI2/M3
Wire thickness: 0.23 mm and 0.28 mm
Size:
1414 x 225 x 100
707 x 225 x 100
